SATELLITE SUPPORT
https://www.sat-support.tv/forum/

AMIKO MINI COMBO EXTRA
https://www.sat-support.tv/forum/viewtopic.php?f=120&t=12010
Page 1 of 3

Author:  hopper [ 21 Apr 2017, 20:38 ]
Post subject:  AMIKO MINI COMBO EXTRA

Hi

Hope someone can help
I need to reflash AMIKO MINI COMBO EXTRA but has no serial port
How do you reflash it's stuck on boot

Thanks

Author:  mihaip [ 22 Apr 2017, 06:38 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

The serial port is located in the "audio jack" or the "scart" ... you need a special cable ...

Author:  hopper [ 22 Apr 2017, 11:23 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

Thanks for that

I have a serial that came with the Amiko HD I'll try that
Not sure about the scart ?

What type of cable do I need

Thanks

Author:  mihaip [ 22 Apr 2017, 16:14 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

Amiko Mini Combo Extra , I have one ! by hazard , have AV jack and is used for
IR sensor and RS232 ... you need a 4 pole jack cable and on the other end ...
DIB9 connector ... then a null modem cable ... and a USB-to-RS232 !!!
That's all ! :roll: ... or ... call a friend witch already have all these ...

Image

Author:  hopper [ 22 Apr 2017, 20:18 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

Thanks

Going to try this in an hour
I have one of these cables from the other Amiko I have.

Thanks

Author:  hopper [ 22 Apr 2017, 21:19 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

Hi

I tried that with the cable I have for the Amiko mini combo
and I'm using the toolbox for 3612 not sure if its the correct tool to use.

What software should I be using all im getting on the box is the display showing on ON every now and then

Thanks

Author:  mihaip [ 23 Apr 2017, 05:53 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

This one ... https://www.sat-support.tv/?a=downloads&dir=199

Author:  hopper [ 23 Apr 2017, 10:57 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

Sorry

I have the FW loaded into the software but when I run the software and power on the box I'm not getting any hand shake.

I have the cable pluged into the IR port as this is the only place the cable will fit.

Thanks

Author:  mihaip [ 23 Apr 2017, 13:57 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

The cable is 1-to-1 !!! you need for connecting RS232 adapter an intermediate
Null-Modem-Cable ... this one is crossing the transmiter and receiver wires !

Author:  hopper [ 23 Apr 2017, 20:16 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

Thanks for your help

I have the cable that I use for the Amiko mini Combo and that works fine as there is a RS232 port on it, which is the same as the one in your picture.

But there is no RS232 port on the Amiko combo Extra, so I tried to plug it into the IR port this does not work.

The cable will not fit to any other port on the Amiko.

Please help

Author:  mihaip [ 23 Apr 2017, 21:29 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

I must ask monday the technicians from Amiko ...

Author:  hopper [ 24 Apr 2017, 11:40 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

Thats great

Will you let me know what they say

Thanks again for all your help.

Author:  mihaip [ 24 Apr 2017, 11:55 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

Bad news !!! Amiko Mini Combo Extra does not have RS232 !!! has a JTAG
connector on the Mainboard !!! a specialized service is the only chance or ...
use the warranty !!! just send it back ...

Author:  hopper [ 24 Apr 2017, 13:04 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

Thanks for that

I have done a few Jtaging on CCTV NVR's and on Xbox's
Do you have a diagram and software needed to do this.

I should be able to get one made up.

Thanks

Author:  mihaip [ 24 Apr 2017, 13:20 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

Unfortunately I don't have ! never done ! I can ask ... but no promises !!! :roll:

Author:  hopper [ 24 Apr 2017, 16:59 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

Thanks again

Author:  davor2 [ 07 May 2017, 21:49 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

inside there is 4 pin rs232 connecor on motherboard

Attachments:
File comment: open amiko mini combo extra
pin.jpg
pin.jpg [ 84.6 KiB | Viewed 47773 times ]

Author:  davor2 [ 07 May 2017, 21:53 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

mihaip wrote:
Bad news !!! Amiko Mini Combo Extra does not have RS232 !!! has a JTAG
connector on the Mainboard !!! a pecialized service is the only chance or ... use
the warranty !!! just send it back ...


my amiko mini combo extra have rs232 and jtag
https://imgur.com/sVL6MoQ

Author:  davor2 [ 07 May 2017, 22:12 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

hopper wrote:
Thanks for that

I have done a few Jtaging on CCTV NVR's and on Xbox's
Do you have a diagram and software needed to do this.

I should be able to get one made up.

Thanks

upgrade tool for amiko mini combo EXTRA

Attachments:
File comment: UNzip
upgrade tool 1.2.03.zip [174.61 KiB]
Downloaded 1002 times

Author:  hopper [ 11 Aug 2017, 12:11 ]
Post subject:  Re: AMIKO MINI COMBO EXTRA

Hi

I'm looking for a site that hosts the FW for the Amiko A4 OTT

thanks

Page 1 of 3 All times are UTC + 3 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/