SATELLITE SUPPORT
https://www.sat-support.tv/forum/

Faceti cunostiinta cu ... Gigablue Trio 4K (recovery)
https://www.sat-support.tv/forum/viewtopic.php?f=204&t=62166		 Page 1 of 1
Author:  mihaip [ 15 Dec 2024, 15:45 ]
Post subject:  Faceti cunostiinta cu ... Gigablue Trio 4K (recovery)
Gigablue Trio 4K

Din greseala am sters topicul original ! asa ca-l incropesc din
ce am putut recupera de ici si de colo !!!

Image

CPU: ARM Cortex A53, Quad Core 64Bit, (4x 1.6GHz) 15.000 Dmips
Chipset : Hisilicon Hi3798MV200 Huawei
Memory : 8 GB eMMC Flash / 1 GB Ram DDR3 SD RAM
Display : 4 Digit / 7 Segment
Audio : S/PDIF Audio Output Optical (Digital)
Video : H.265 HEVC

2 x USB (1x USB 3.0 & 1x USB 2.0)
1 x HDMI 2.1
1 x LAN (10/100 MBit/s)
1 x W-LAN 1200Mbps integrated
1 x SD Card Reader
1 x S/C Card Reader Slot
1 x DVB-S2X Tuner, MIS (Multistream)
1 x DVB-C/T2 Tuner H.265 HEVC
1 x RS232 service interface
1 x BT RCU
Author:  mihaip [ 15 Dec 2024, 16:04 ]
Post subject:  Re: Faceti cunostiinta cu - Gigablue Trio 4K
Recovery Trio 4K - cu HiTool

Datele problemei :

- receptor Gigablue Trio 4K defect + unul functional !
- cel defect pus sub tensiune trecea direct in ... UPDT
- @sosozah a adus un cablu serial-jack ... functional ! dar nu si telecomanda !
- am presupus inclusiv ca avem microswitch de "recovery" blocat
- seriala ne-a aratat ca Trio porneste in Boot ... lanseaza Kernelul si gata !!!

Am tras concluzia ca un "baiat istet" a facut o instalare de imagine ...
haiduceasca ! una care a scris un Kernel exotic ... as zice chiar strain !

Am pornit receptorul functional pentru a afla cum s-au alocat partitiile sistem !
si m-am folosit de butoanele din panoul frontal ca sa nevighez prin Enigma2 !
aici mi-a dat o mana de ajutor Linux/Enigma2 ( cat /proc/partitions )


179 1 1024 mmcblk0p1 - fastboot
179 2 1024 mmcblk0p2 - bootargs
179 3 1024 mmcblk0p3 - bootoptions
179 4 3072 mmcblk0p4 - baseparams
179 5 4096 mmcblk0p5 - pqparam
179 6 4096 mmcblk0p6 - logo
179 7 4096 mmcblk0p7 - deviceinfo
259 0 4096 mmcblk0p8
259 1 4096 mmcblk0p9
259 2 32768 mmcblk0p10 - loader
259 3 8192 mmcblk0p11 - kernel
259 4 16384 mmcblk0p12
259 5 16384 mmcblk0p13
259 6 16384 mmcblk0p14
259 7 16384 mmcblk0p15
259 8 7501824 mmcblk0p16
179 24 512 mmcblk0rpmb
179 16 4096 mmcblk0boot1
179 8 4096 mmcblk0boot0

Orbecaind si facand analogii cu Dinobot am facut alocarea de mai sus !!!
Am creat un folder Gigablue Trio 4K pe care l-am populat cu ce am gasit
in imaginea OpenATV Recovery !!! si Kernel din imaginea Normala !

Image

Am construit fisierul de configuratie al partitiilor (XML)

Code:
<Partition_Info ProgrammerFile="">
<Part Sel="1" PartitionName="fastboot" FlashType="emmc" FileSystem="none" Start="0" Length="1M" SelectFile="C:\Users\misup\Desktop\Giga Trio 4k\fastboot.bin"/>
<Part Sel="1" PartitionName="bootargs" FlashType="emmc" FileSystem="none" Start="1M" Length="1M" SelectFile="C:\Users\misup\Desktop\Giga Trio 4k\bootargs.bin"/>
<Part Sel="1" PartitionName="baseparam" FlashType="emmc" FileSystem="none" Start="2M" Length="4M" SelectFile=""/>
<Part Sel="1" PartitionName="pqparam" FlashType="emmc" FileSystem="none" Start="6M" Length="4M" SelectFile=""/>
<Part Sel="1" PartitionName="logo" FlashType="emmc" FileSystem="none" Start="10M" Length="4M" SelectFile=""/>
<Part Sel="1" PartitionName="deviceinfo" FlashType="emmc" FileSystem="none" Start="14M" Length="4M" SelectFile=""/>
<Part Sel="1" PartitionName="loader" FlashType="emmc" FileSystem="none" Start="18M" Length="32M" SelectFile="C:\Users\misup\Desktop\Giga Trio 4k\apploader.bin"/>
<Part Sel="1" PartitionName="trustedcore" FlashType="emmc" FileSystem="none" Start="50M" Length="8M" SelectFile=""/>
<Part Sel="1" PartitionName="kernel" FlashType="emmc" FileSystem="none" Start="58M" Length="32M" SelectFile="C:\Users\misup\Desktop\Giga Trio 4k\kernel.bin"/>
<Part Sel="1" PartitionName="rootfs" FlashType="emmc" FileSystem="ext3/4" Start="90M" Length="512M" SelectFile=""/>
</Partition_Info>


- am trecut pe receptorul defect cu retea si serial conectate !!!
- am dedus IP-ul pe care si l-a luat , search pe router
- am pornit TFTPD , serverul de FTP si i-am dat parametrii
- am pornit HiTool si i-am dat parametrii

Image

Si acum , voiniceste ! am zis ... Burn ! zis si facut ! la final
am salvat fisierul de configurare (XML) pentru eternitate !!!
siii ... Reboot !!!

Image

Image

Image

Image

Gigablue are un sistem de recovery ciudat ! foloseste Kernelul existent in
EMMC si nu unul livrat in imaginea de recovery de pe stickul USB ! asa ca
daca Kernelul a fost rescris prosteste ... in EMMC el pe ala i-l lanseaza si
ramine cracanat !

Ce joaca buna am tras ! am facut si cateva presupuneri norocoase dar
m-am bazat masiv pe experienta recovery Amiko Viper 4K V20.30.40 !
Author:  mihaip [ 15 Dec 2024, 16:11 ]
Post subject:  Re: Faceti cunostiinta cu - Gigablue Trio 4K
Operatia a reusit ! dar din ce spune @sosozah ... pacientul nu se simte prea
bine ! asa ca astept ziua lui de teste sa vedem ce si cum !

Ceea ce mi-a fost suspect a fost ca Trio 4K a pornit direct in imaginea de firma !
asta putea sa insemne ca nimeni n-a scris nimic eronat pe el ! ci pur si simplu
partitia Kernel nu s-a scris corect initial ! Asta nu este un semn bun ! poate sa
insemne o pana hardware EMMC instabil ... si asta ar fi un caz de final trist !
Author:  sosozah [ 15 Dec 2024, 18:24 ]
Post subject:  Re: Faceti cunostiinta cu - Gigablue Trio 4K
Dupa vreo opt ore de jucat cu HiTool si PuTTY, incep sa cred ca @MihaiP are dreptate:

Code:
Warning - bad CRC or eMMC, using default environment


Mai insist.
Author:  mihaip [ 16 Dec 2024, 11:12 ]
Post subject:  Re: Faceti cunostiinta cu - Gigablue Trio 4K
Zau ca n-am cobit ! :lol: :lol: :lol:
Din pacate mesajul tau miroase de la o posta a pana de EMMC !
nu este ceva foarte frecvent ... dar uite ca se intampla !
Author:  sosozah [ 28 Dec 2024, 17:48 ]
Post subject:  Re: Faceti cunostiinta cu ... Gigablue Trio 4K (recovery)
Baiul pare sa fie totusi altul. Eroarea legatata de EMMC de mai sus am
primit-o cand am sters tabela de partitii si am pus doar fastboot in memorie.
Din pacate tot se blocheaza la "starting kernel", fie in modul de pornire
normal, fie in cel de intrat in recovery.

Singurul mod in care am reusit sa-l pornesc a fost sa intrerup procedura de
boot (Ctrl+C pentru a ramane in fastboot), sa incarc prin tftp un kernel.bin
si sa il lansez. Fastboot are o serie de comenzi de baza, lista lor se poate
obtine cu "help" sau "?". Cu comanda "printenv" sunt afisati parametri din
bootargs si pot fi modificati cu "setenv", apoi salvati in memorie cu "saveenv".
La copierea prin tftp mi-a copiat fisierul la adresa 0x8000 si am folosit
comanda "bootm 0x8000" pentru a lansa kernelul. Logul e plin de erori,
printre care si ceva legat de unul dintre procesoare, dar aparatul functioneaza
stabil pana cand ii dau restart. La comanda dmesg primesc raspunsul acesta:

Code:
login as: root
[email protected]'s password:
root@gbtrio4k:~# dmesg
Bluetooth: SCO socket layer initialized
clocksource: Switched to clocksource hisp804
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
NetWinder Floating Point Emulator V0.97 (double precision)
hw perfevents: enabled with armv7_cortex_a17 PMU driver, 7 counters available
futex hash table entries: 1024 (order: 4, 65536 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 [email protected]).
FS-Cache: Netfs 'cifs' registered for caching
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
yaffs: yaffs built Installing.
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
hiahci-phy: registered new sata phy driver
brd: module loaded
loop: module loaded
hifmc100: registerd new interface driver hifmc100.
hifmc100: Found flash memory controller hifmc100.
hifmc100: no found spi-nor device.
hifmc100: no found nand device.
hifmc100: no found spi-nand device.
hieth: /soc/hieth@f9c30000/hieth_phy@0 has invalid PHY address
libphy: himii: probed
mdio_bus himii: /soc/hieth@f9c30000/hieth_phy@0 PHY address 255 is too large
hieth: no dev probed!
libphy: higmac_mii_bus: probed
attached PHY 3 to driver Generic PHY, PHY_ID=0x11a
ETH: rgmii, phy_addr=3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform f9890000.ehci: EHCI Host Controller
ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
ehci-platform f9890000.ehci: irq 34, io mem 0xf9890000
ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
ohci-platform f9880000.ohci: Generic Platform OHCI controller
ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
ohci-platform f9880000.ohci: irq 35, io mem 0xf9880000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci-hcd f98a0000.xhci: xHCI Host Controller
xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3
xhci-hcd f98a0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x0001001                                                                                                                                                             0
xhci-hcd f98a0000.xhci: irq 37, io mem 0xf98a0000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd f98a0000.xhci: xHCI Host Controller
xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR Sharp protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR XMP protocol handler initialized
sp805-wdt f8a2c000.watchdog: registration successful
registered new interface driver himciV2.0_4.4.35_20170401
usb 1-1: new high-speed USB device number 2 using ehci-platform
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
mmc0: MAN_BKOPS_EN bit is not set
mmc0: new DDR MMC card at address 0001
mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB
 mmcblk0: p1(boot) p2(bootargs) p3(bootoptions) p4(baseparam) p5(pqparam) p6(log                                                                                                                                                             o) p7(deviceinfo) p8(softwareinfo) p9(loaderdb) p10(loader) p11(trustedcore) p12                                                                                                                                                             (linuxkernel1) p13(linuxkernel2) p14(linuxkernel3) p15(linuxkernel4) p16(userdat                                                                                                                                                             a)
f9820000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
usbcore: registered new interface driver snd-usb-audio
oprofile: using timer interrupt.
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
Bluetooth: Starting self testing
Bluetooth: ECDH test passed in 25502 usecs
Bluetooth: SMP test passed in 70 usecs
Bluetooth: Finished self testing
ALSA device list:
  No soundcards found.
Freeing unused kernel memory: 568K (c0ae8000 - c0b76000)
This architecture does not have kernel memory protection.
EXT4-fs (mmcblk0p16): recovery complete
EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: (null)
Load hi_media.ko success.       (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:28:35])
Load hi_mmz.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:28:35])
virtual device initialization.
Load hi_common.ko success.      (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [Jun 26 2018, 14:24:58])
Load hi_pq.ko success.          (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:28])
Load hi_cipher.ko success.      (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:30:22])
Load hi_hdmi.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [Mar 30 2019, 15:16:17])
hisi hdmi CEC Driver, (c) 2018 Define Technologies
Load hi_vou.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [Jun 28 2018, 16:48:45])
Load hi_gpio.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:30:40])
Load hi_gpioi2c.ko success.     (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:14])
Load hi_i2c.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:15])
Load hi_tde.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:41])
Load hi_otp.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:23])
Load hi_demux.ko success.       (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [Jul 26 2018, 18:25:22])
Load hi_adec.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:29:59])
Load hi_vfmw.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:53])
Load hi_vpss.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:32:27])
Load hi_vdec.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:44])
Load hi_adsp.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:30:00])
hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok
Load hi_aiao.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [Jul 14 2018, 10:00:23])
Load hi_pvr.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:38])
Load hi_tuner.ko success.       (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [Nov  7 2022, 12:17:07])
Load hi_keyled.ko success.      (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [Jul 14 2018, 10:01:39])
virtual DVB adapter driver, version 1.4, (c) 2010-12 Honza Petrous, SmartImp.cz
vtunerc: registered /dev/misc/vtuner0
vtunerc: registered /dev/misc/vtuner1
vtunerc: registered /dev/misc/vtuner2
hi_dvb: unknown parameter 'hi_vendor' ignored
hi_dvb: unknown parameter 'hi_device' ignored
phi
HI PCIE bridge driver, Copyright (C) 2005-2018 Micronas
DVB: registering new adapter (nHi)
si2166 attach success
DVB: registering adapter 0 frontend 0 (Si2166D)...
[hi_dvb_attach_tsport:740 dmx 0,port 32]0 5 1 0 184
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
[07:14:43:338 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
[07:14:43:360 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
si2166 attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(1) , ADDR: 128(0x80)
atbm781x2x3x attach success!
DVB: registering adapter 0 frontend 0 (ATBM7821 DVB-T2/C)...
[hi_dvb_attach_tsport:740 dmx 1,port 33]0 5 1 0 184
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
[07:14:43:818 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
[07:14:43:840 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
si2166 attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(2) , ADDR: 128(0x80)
[07:14:44:072 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[07:14:44:094 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
dvb video add event 17 - 7 0

atbm781x2x3x attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(1) , ADDR: 152(0x98)
[07:14:44:326 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[07:14:44:348 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
atbm781x2x3x attach fail!
phi: No HI Demod Found!
[hi_dvb_attach_tsport:740 dmx 2,port 34]0 5 1 0 184
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
[07:14:44:592 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
dvb video add event 17 - 7 0

[07:14:44:614 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
si2166 attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(2) , ADDR: 128(0x80)
[07:14:44:850 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[07:14:44:872 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
atbm781x2x3x attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(1) , ADDR: 152(0x98)
[07:14:45:104 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[07:14:45:126 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
atbm781x2x3x attach fail!
phi: No HI Demod Found!
[hi_dvb_attach_tsport:740 dmx 3,port 35]0 5 1 0 184
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
[07:14:45:370 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
dvb video add event 17 - 7 0
[07:14:45:392 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
si2166 attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(2) , ADDR: 128(0x80)
[07:14:45:628 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[07:14:45:650 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
atbm781x2x3x attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(1) , ADDR: 152(0x98)
[07:14:45:882 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[07:14:45:904 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
atbm781x2x3x attach fail!
phi: No HI Demod Found!
No this tuner device
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
Load hi_fb.ko success.          (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [Nov 17 2020, 17:37:22])
Mali: Mali device driver loaded
misc hi_dbe: hi_dbe ready
Load hi_jpegdec.ko success.     (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:17])
Load hi_jpegenc.ko success.     (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:17])
Load hi_png.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:26])
Load hi_advca.ko success.       (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:30:01])
Load hi_venc.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:48])
dvb video add event 17 - 7 0

Load hi_aenc.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:30:04])
Load hi_sci.ko success.         (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [Mar 27 2019, 19:29:44])
Load hi_vi.ko success.          (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [May 16 2018, 18:31:55])
get mmc 0 host 8GTF4R
Load hi_pmoc.ko success.        (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180                                                                                                                                                             124] Build Time: [Nov 11 2022, 14:31:50])
Registered IR keymap rc-hi3798
input: dreambox advanced remote control as /devices/virtual/rc/rc0/input0
rc0: dreambox advanced remote control as /devices/virtual/rc/rc0
[07:14:46:264 ERROR-HI_SYS]:HI_DRV_SYS_SetIrqAffinity[679]:cpu num 2 is offline,                                                                                                                                                              irq num is 20,name is ir_std!
HI_DRV_SYS_SetIrqAffinity failed.
hisi KEYS Driver, (c) 2017 Define Technologies
input: Hisi Front Panel Button Controls as /devices/platform/hisi_keys/input/inp                                                                                                                                                             ut1
hisi encoder Driver, (c) 2017 Define Technologies
dvb video add event 17 - 7 0

tntfs: module license 'Commercial. For support email [email protected].' t                                                                                                                                                             aints kernel.
Disabling lock debugging due to kernel taint
Tuxera NTFS driver 3017.7.4.6 [Flags: R/W MODULE].
Built against headers 4.4.35_hi3798mv2x #1 SMP Tue Dec 12 14:16:24 CST 2017 arm
Running on kernel 4.4.35 #1 SMP Sat Feb 11 22:56:28 UTC 2023 armv7l
WARNING: Running kernel does not match configured kernel headers the driver was                                                                                                                                                              built with!  The driver needs to be rebuilt with the correct kernel headers!
SGI XFS with ACLs, security attributes, realtime, no debug enabled
EXT4-fs (mmcblk0p16): re-mounted. Opts: data=ordered
FAT-fs (mmcblk0p3): Volume was not properly unmounted. Some data may be corrupt.                                                                                                                                                              Please run fsck.
[07:14:48:667 ERROR-HI_PM]:c51_GetWakeUpMode[1318]: wakeup mode err!
proc_vmpeg_0_dst_apply_write 1
[iframe_confirm:190] iframe confirm

video[0] ready to play
dvb video add event 17 - 7 0

[iframe_finish:208] iframe finish

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
hi_gmac_v200 f9840000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[iframe_confirm:190] iframe confirm

video[0] ready to play
[iframe_finish:208] iframe finish

dvb video add event 17 - 7 0

[07:15:02:309 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Port = 0 RelPortFrame                                                                                                                                                              0 Failed
OPS_si2166_init
@RDA5815M_Initialize
api->spi_download 0
Build Option: Si2183_B60_COMPATIBLE
Si2166-D60 Part running 'FW_6_1b4'
@si2166_i2c_gate_ctrl
@si2166_i2c_gate_ctrl
@OPS diseqc tone = 0(22K-OFF)
@si2166_diseqc_set_voltage OFF
@OPS diseqc tone = 0(22K-OFF)
@si2166_diseqc_set_voltage OFF
proc_vmpeg_0_dst_apply_write 00000001

UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
yaffs: dev is 187695105 name is "mmcblk0p1" rw
yaffs: passed flags ""
yaffs: yaffs: Attempting MTD mount of 179.1,"mmcblk0p1"
yaffs: yaffs: MTD device 1 either not valid or unavailable
yaffs: dev is 187695105 name is "mmcblk0p1" rw
yaffs: passed flags ""
yaffs: yaffs: Attempting MTD mount of 179.1,"mmcblk0p1"
yaffs: yaffs: MTD device 1 either not valid or unavailable
tntfs info (device mmcblk0p1, pid 3282): ntfs_fill_super(): fail_safe is enabled                                                                                                                                                             .
stStdTiming[h:1280, v:720]
stStdTiming[h:1280, v:1024]
stStdTiming[h:1280, v:720]
stStdTiming[h:1280, v:1024]
stStdTiming[h:1280, v:720]
stStdTiming[h:1280, v:1024]
proc_vmpeg_0_dst_apply_write 1
proc_vmpeg_0_dst_apply_write 1
bestfit
panscan
panscan
panscan
panscan
proc_video_videomode_50hz_write [1080p50]
proc_video_videomode_60hz_write [1080p]
proc_video_videomode_24hz_write [1080p24]
panscan
press key [0x50af12ed] detective


O sa incerc sa ii fac un factory reset, dar nu stiu daca nu o sa apeleze la
prostiile pe care i le-am tot scris in memorie in joaca cu HiTool. Macar am
depistat procedura cu care sa porneasca, deocamdata.

LE: dupa factory reset a pornit cu imaginea teamblue 7.3, dar nu am meniul
de multiboot activ. Il las asa deocamdata, ca mi-a mancat prea multe zile.
Author:  mihaip [ 28 Dec 2024, 19:09 ]
Post subject:  Re: Faceti cunostiinta cu ... Gigablue Trio 4K (recovery)
Imaginea de firma nu are optiunea de recovery ! pui imaginea de recovery
de la OpenATV dupa care vei avea un meniu de activare multiboot !
Author:  sosozah [ 28 Dec 2024, 19:19 ]
Post subject:  Re: Faceti cunostiinta cu ... Gigablue Trio 4K (recovery)
Cum se poate scrie imaginea recovery daca nu imi intra in meniul de
update/recovery la start?
Author:  mihaip [ 28 Dec 2024, 20:31 ]
Post subject:  Re: Faceti cunostiinta cu ... Gigablue Trio 4K (recovery)
Trebuie sa refaci imaginea mea de recovery cea pentru HiTool !!!

Image

Nu intra in recovery pentru ca incearca sa foloseasca kernelul deja scris
in flash ... si cu ala este o problema ! uneori se citeste alteori nu ! La mine
dupa ce am scris imaginea de mai dus ... a pornit normal ! Dupa un start
normal ! trebuie facut un stick recovery OpenATV si incercata procedura
de recovery ! daca aceea merge , se rescrie inclusiv Kernelul si ... cine stie !

Pentru mine este limpede ca avem in fata un "bolnav" ! ar putea sa functioneze
acceptabil dupa un start normal cu un minim de canale si pluginuri instalate !
si de acolo in colo ... doar vizionare !
Page 1 of 1 All times are UTC + 2 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/