Recovery Amiko Viper 4K V20/V30 (Hi3798MV200)
Aceasta procedura a fost publicata de prietenul nostru @lukas26
pe un forum prieten ! si pusa in aplicare de @zildan pe un V20
pe care se instalase o imagine de test ... gresita !!!!
how to install image enigma2 on AMIKO VIPER 4K V30 using telnet
(
https://jungle-team.com/como-instalar-i ... er-4k-v30/ )
Insert the USB drive with the image you want to flash
Connect to the box using telnet (even if It's bootlooping, it works)
The username is "root"
Now use the command:
ofgwrite -n <path-to-the-image>If this results with no errors, You can proceed to flash the image using
this command:
init 4
ofgwrite -k -r <path-to-the-image>Note: the usb drive should be mounted in /media/hdd, so the image path
should start with it. For example:
/media/hdd/amiko/u57, this should be
the standard.