| SATELLITE SUPPORT https://www.sat-support.tv/forum/ |
|
| STB Kodi 22 (Piers) with HW support https://www.sat-support.tv/forum/viewtopic.php?f=228&t=62287 |
Page 1 of 1 |
| Author: | mihaip [ 10 Aug 2026, 13:09 ] |
| Post subject: | STB Kodi 22 (Piers) with HW support |
STB Kodi 22 (Piers) with HW support By @Captain The basis of this overview is the current OpenATV 8.0 build configuration, the new libstbplayer backend code and the tests carried out so far on real boxes. CONFIRMED – tested on a real box with STB-Kodi BACKEND – offered as a hardware codec by the current STB backend and machine configuration, but not yet tested for each codec on real hardware PARTIAL TEST – Hardware path has already been tested, points are still open OPEN – Build or platform-specific video output not yet fully tested 1. Broadcom (BCM) The base set of the new BCM-STB player contains on all supported BCM platforms: MPEG-1, MPEG-2, MPEG-4 Part 2, DivX 3/4/5, Xvid, H.263 and H.264/AVC The following information therefore only mentions the additional hardware codecs. BCM7251S Example boxes: Mutant HD51, AX HD51, AX Ultra, AirDigital H7/H17 and Xtrend ET1x000 Additional hardware codecs: HEVC/H.265, VC-1/WMV3, VP6, VP8, VP9 and FLV1/Sorenson Spark Booth: CONFIRMED at HD51. H.264, HEVC and VP9 work with hardware decoding. Audio, FF/RW and player controls work. BCM7252S Example boxes: Dreambox DM900/DM920, GigaBlue GB7252 and Vu+ Uno 4K/Uno 4K SE Additional hardware codecs: HEVC/H.265, VC-1/WMV3, VP6, VP8, VP9 and FLV1/Sorenson Spark Stand: PARTIAL TEST on the DM920. Hardware path and audio were running. The final R40 test for HDMI frame rate and VP9 is still open. BCM7376 Example boxes: Vu+ Duo 4K, Duo 4K SE, Solo 4K and Ultimo 4K Additional hardware codecs: HEVC/H.265, VC-1/WMV3, VP6, VP8, VP9 and FLV1/Sorenson Spark Stand: CONFIRMED at the Vu+ Duo 4K SE. H.264 and HEVC up to 4K, audio and player control work. BCM72604 Example boxes: Edision OS mini 4K, OS mio 4K, GigaBlue GB72604, Vu+Zero 4K and Dags 72604 Additional hardware codecs: HEVC/H.265, VC-1/WMV3 and VP9 Status: BACKEND build path is present. A test on real hardware is still pending. [img]BCM7435[/img] Example boxes: Dreambox DM7080 and DM820 Additional hardware codecs: VC-1/WMV3, VP6, VP8 and FLV1/Sorenson Spark Not in the current driver profile: HEVC/H.265 and VP9 Booth: BACKEND DM820 was built as a MIPSel reference. DM7080 uses the same Kodi and driver path. And other BCM chipsets. 2. HiSilicon (HiSi) The current HiSilicon backend code offers the following hardware codec set: MPEG-1, MPEG-2, MPEG-4 Part 2, H.263, H.264/AVC, HEVC/H.265, VC-1, VP8, VP9, and MJPEG. The maximum image size reported by the backend is 3840x2160. HiSilicon 3798MV200 Example boxes: Octagon SF8008, AX/Mutant HD61, HD60/HD66, Pulse 4K, Multibox, AirDigital H9/H10, Dinobot U571/Viper4K V40 and more Hardware codecs: MPEG-1/2, MPEG-4 Part 2, H.263, H.264, HEVC, VC-1, VP8, VP9 and MJPEG Booth SF8008 and HD61/AX61: CONFIRMED Hardware and 4K path, low CPU load, FF/RW, audio track change and subtitles work. Booth U571/Viper4K V40: OPEN The box has a different native video output. The hardware player is recognized, but the image output is not yet fully adjusted. HiSilicon 3798CV200 Example boxes: Dinobot U5 PVR, U53, U532 and U533 Hardware-Codecs des Backends: MPEG-1/2, MPEG-4 Part 2, H.263, H.264, HEVC, VC-1, VP8, VP9 und MJPEG Stand: OFFEN Das Backend ist vorgesehen. Ein echter Kodi-Boxentest steht noch aus. 3. Software fallback A codec that is not in the hardware list of the respective platform is not promised as hardware decoding. Kodi can play it in software via FFmpeg if necessary. On older or weaker STB processors, software decoding for Full HD or 4K is usually not sufficient. MKV, MP4, TS, and other containers are not the same as the video codec. Whether a file works completely also depends on the audio format, profile, level, bit depth, frame rate, and driver version. Audio runs separately via the Kodi and ALSA paths. Player functions such as pause, seek, FF/RW, audio track change, subtitles and the Kodi OSD are retained in the new STB player. |
|
| Author: | mihaip [ 10 Aug 2026, 13:16 ] |
| Post subject: | Re: STB Kodi 22 (Piers) with HW support |
Constructia pentru modelele enuntate inca nu este validata, desi pentru unele dintre ele , poate fi descarcata si instalata ! inca lipsesc unele dependente care urmeaza sa fie rezolvate ! Ce este nou ? - nou este suportul de accelerare grafica - si rezolutia 2160p a playerului intern - chipseturile mai vechi (HD) sunt posibile dar nerecomandabile - dupa cum se vede ... deocamdata nu exista suport AML (Dream One) Mai putin interesant acum un Kodi ! exista o puzderie de alternative IPTV ! |
|
| Author: | mihaip [ 14 Aug 2026, 07:23 ] |
| Post subject: | Re: STB Kodi 22 (Piers) with HW support |
14.08.2026 Sursa - @Captain ! - pregatirile pentru lansarea oficiala a Kodi 22 (Piers) sunt gata ! - Kodi va apare in feed ... incepand cu saptamina urmatoare - el se poate construi pentru toate receptoarele cu imagini GLES - exceptii : cele cu chipseturi BCM7351 (sf4008, et11000, Mut@nt hd51) |
|
| Author: | mihaip [ 14 Aug 2026, 14:15 ] |
| Post subject: | Re: STB Kodi 22 (Piers) with HW support |
Kodi build for OpenATV 8.0 starts now @Captain The Kodi build is now starting. In order to use the new Kodi version with OpenATV 8.0, you need a current OpenATV 8.0 image. An image from 14.08.2026 built after 10:00 a.m. is recommended. Older 8.0 images may also work, but may not yet contain all the necessary updates. The reason why Kodi has only been activated now is the ongoing rebuild on our build servers. Major OE core updates as well as the new GCC 16.2 have been integrated into the images. As a result, the complete image rebuild took much longer than usual. The Kodi build itself also takes time: - The normal image update currently takes about 15 minutes per box. - The Kodi build takes an additional 60 minutes per model/box type. It will therefore take a few more days for Kodi to be built for all supported boxes. How can you check if Kodi is already available for your box? Just open the plugin browser and look for the following plugin: Code: enigma2-plugin-extensions-stbkodilauncher As soon as this plugin is displayed, the new Kodi build for your box will be available on the feed. If it is not yet displayed, please be patient. The build for your box is simply not finished yet. Kodi is basically built for the boxes that already had Kodi support before. The following Dreambox models are also new: Dreambox DM820 Dreambox DM7080 Dreambox DM900 Dreambox DM920 Dreambox One Dreambox Two Please be patient until the full build is complete for all supported models. |
|
| Author: | mihaip [ 16 Aug 2026, 09:00 ] |
| Post subject: | Re: STB Kodi 22 (Piers) with HW support |
16.08.2026 Kodi 22 Piers Imaginea standard din 15.08.2026 are deja elementele mentionate ! testul meu este facut pe Dream One ! - este o imagine "normala" fara GLES si Chromium - foloseste noul GCC 16.2 si Python 3.14.7 - are deja in feed suport pentru noul Kodi 22 - pluginul de instalare "stbkodilauncher" apare la extensii - arhiva imaginii are dimensiuni normale     Instalarea lui Kodi a "papat" 270 Mb EMMC Flash !  
|
|
| Page 1 of 1 | All times are UTC + 2 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|