Re: Amiko A3 low level recovery
This is your lucky day !!!
- you need a USB-to-mUSB cable ( as you are using for smatphone ! )
- you must unpack the archive
Recovery factory image- install the World Cup USB Win driver from dedicated folder
- remove power cord from A3 !!!
- press "recovery" button an keep it then ...
- connect the PC USB to mUSB service port from A3
- if connected from File menu browse for update file into "/resources"
- then browse for config xml file in /tmp
- check "erase old system..."
- click on START ... if you are really lucky .... that's it !
There is no 100% warranty this will work ... but if you are desperate ... try !
unless you have a hardware failure ( e.g. bad block in flash ) ... will work !